NSN 2920-00-351-9608
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-351-9608 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1330235, 2920-00-351-9608, 00-351-9608, 2920003519608, 003519608
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-351-9608 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
SPLINED SHAFT END, THREADED
Cross Reference | NSN 2920-00-351-9608
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1330235 | 12204 | DAIMLER CHRYSLER |
Technical Data | NSN 2920-00-351-9608
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 5000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1180 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 775 |
| GROUNDING METHOD | INTERNAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 4 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.438 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.438 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 8.774 INCHES MINIMUM AND 8.788 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 9.774 INCHES MINIMUM AND 9.778 INCHES MAXIMUM |
| TOP MOUNTING HOLE DIAMETER | 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| BOTTOM MOUNTING HOLE DIAMETER | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 196.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 118.5 |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| THREAD LENGTH | 0.518 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL |
| SPLINE WIDTH | 0.216 INCHES NOMINAL |
| SPLINE LENGTH | 1.647 INCHES NOMINAL |
| SPLINE QUANTITY | 6 |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| FURNISHED ITEMS | COOLING FAN AND DRIVE PULLEY |