NSN 2920-00-351-9606
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-351-9606 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: CS29200011, CS2920-0011, YB16A, WUD2400, YB16A, 2920-00-351-9606, 00-351-9606, 2920003519606, 003519606
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-351-9606 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-351-9606
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CS2920-0011 | 16236 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| YB16A | 27996 | HEIL ENVIRONMENTAL INDUSTRIES |
| WUD2400 | 53496 | SCHRAMM, INC. |
| YB16A | 66289 | WISCONSIN MOTORS LLC |
Technical Data | NSN 2920-00-351-9606
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 6.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 13.5 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 960 |
| GROUNDING METHOD | EXTERNAL |
| GROUND POLARITY TYPE | POSITIVE |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 2.094 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 2.094 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.125 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.234 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.328 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.375 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.000 INCHES NOMINAL |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.750 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| FURNISHED ITEMS | VOLTAGE REGULATOR |