NSN 2920-00-224-6200

Part Details | ENGINE ACCESSORY GENERATOR

2920-00-224-6200 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.

Alternate Parts: DE56516R, DE56516, 2920-00-224-6200, 00-224-6200, 2920002246200, 002246200

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
29JAN 01, 196300-224-620017311 ( GENERATOR, ENGINE ACCESSORY )
REFERENCE DRAWINGS & PICTURES

ROUND FLANGE WITH HOLES EQUALLY SPACED

STRAIGHT SHAFT END, THREADED, W/KEYWAY

Cross Reference | NSN 2920-00-224-6200
Part Number Cage Code Manufacturer
DE56516R6N299AGCO CORPPARTS OPN
DE565166N299AGCO CORPPARTS OPN
Technical Data | NSN 2920-00-224-6200
Characteristic Specifications
VOLTAGE IN VOLTS12.0
MAXIMUM OUTPUT CURRENT RATING IN AMPS5.0
MAXIMUM RATED ARMATURE SPEED IN RPM2500
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT2150
MINIMUM CURRENT CUT-IN SPEED IN RPM880
GROUNDING METHOD INTERNAL
GROUND POLARITY TYPE NEGATIVE
SHAFT ROTATION DIRECTION CLOCKWISE
MOUNTING STYLE5 ROUND FLANGE WITH HOLES EQUALLY SPACED
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.016 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER2.938 INCHES NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET6.438 INCHES NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET7.188 INCHES NOMINAL
BOTTOM MOUNTING HOLE DIAMETER0.328 INCHES NOMINAL
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG125.0
MOUNTING HOLE THREAD SERIES DESIGNATOR UNC
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD CLASS 1B
MOUNTING HOLE THREAD DIRECTION RIGHT-HAND
SHAFT DRIVE END STYLE STRAIGHT SHAFT END, THREADED, W/KEYWAY
THREAD LENGTH0.438 INCHES NOMINAL
SECOND STEP DIAMETER0.669 INCHES NOMINAL
KEYWAY WIDTH0.125 INCHES NOMINAL
UNTHREADED PORTION LENGTH0.812 INCHES NOMINAL
KEYWAY LENGTH0.625 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER0.844 INCHES NOMINAL
THREAD SERIES UNS
THREAD DIAMETER0.669 INCHES NOMINAL
THREAD QUANTITY PER INCH20
THREAD CLASS 1A
THREAD DIRECTION RIGHT-HAND
SUBMERSIBILITY NONSUBMERSIBLE
FURNISHED ITEMS DRIVE PULLEY AND VOLTAGE REGULATOR
SPECIAL FEATURESEXTERNALBLASTCOOLING