NSN 2920-00-192-9022

Part Details | ENGINE ACCESSORY GENERATOR

2920-00-192-9022 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.

Alternate Parts: 1117077, 1117077, 1117077, 1117077, 2920-00-192-9022, 00-192-9022, 2920001929022, 001929022

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
29MAR 06, 197000-192-902217311 ( GENERATOR, ENGINE ACCESSORY )
REFERENCE DRAWINGS & PICTURES

ROUND FLANGE WITH HOLES EQUALLY SPACED

STRAIGHT SHAFT END, THREADED, W/KEYWAY

Cross Reference | NSN 2920-00-192-9022
Part Number Cage Code Manufacturer
111707724617GENERAL MOTORS CORP
111707761928GENERAL MOTORS CORPAC-DELCO DIV
111707716764GENERAL MOTORS CORPDELCO REMY DIV
11170771LW55REMY, INC.
Technical Data | NSN 2920-00-192-9022
Characteristic Specifications
VOLTAGE IN VOLTS12.0
MAXIMUM OUTPUT CURRENT RATING IN AMPS60.0
MAXIMUM RATED ARMATURE SPEED IN RPM2500
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1000
RECTIFIER LOCATION INTEGRAL
GROUNDING METHODS$T
GROUND POLARITY TYPE NEGATIVE
SHAFT ROTATION DIRECTION COUNTERCLOCKWISE
MOUNTING STYLE5 ROUND FLANGE WITH HOLES EQUALLY SPACED
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.740 INCHES MINIMUM AND 3.760 INCHES MAXIMUM
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.720 INCHES MINIMUM AND 3.780 INCHES MAXIMUM
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.180 INCHES MINIMUM AND 7.260 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET8.620 INCHES MINIMUM AND 8.780 INCHES MAXIMUM
BOTTOM MOUNTING HOLE DIAMETER0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG180.0
MOUNTING HOLE THREAD SERIES DESIGNATOR UNC
MOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH16
MOUNTING HOLE THREAD CLASS 2B
MOUNTING HOLE THREAD DIRECTION RIGHT-HAND
SHAFT DRIVE END STYLE STRAIGHT SHAFT END, THREADED, W/KEYWAY
THREAD LENGTH0.531 INCHES NOMINAL
SECOND STEP DIAMETER0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
KEYWAY WIDTH0.125 INCHES NOMINAL
UNTHREADED PORTION LENGTH0.750 INCHES NOMINAL
KEYWAY LENGTH0.625 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER0.900 INCHES NOMINAL
THREAD SERIES UNS
THREAD DIAMETER0.669 INCHES NOMINAL
THREAD QUANTITY PER INCH20
THREAD CLASS 2A
THREAD PITCH DIAMETERS+0.6324 TO +0.6365 INCHES
THREAD DIRECTION RIGHT-HAND
SUBMERSIBILITY NONSUBMERSIBLE
FURNISHED ITEMS COOLING FAN AND WOODRUFF KEY
FSC APPLICATION DATAENGINE ELECTRICAL SYSTEM,NONAIRCRAFT