NSN 2920-00-167-8549
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-167-8549 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: A0015516AA, A0011516AA, 5516AA, 5516A, 5516AA, 5516A, 11640180, 2920-00-167-8549, 00-167-8549, 2920001678549, 001678549
Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
---|---|---|---|
29 | JUN 05, 1968 | 00-167-8549 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-167-8549
Part Number | Cage Code | Manufacturer |
---|---|---|
A0015516AA | 35510 | PRESTOLITE ELECTRIC INC |
A0011516AA | 35510 | PRESTOLITE ELECTRIC INC |
5516AA | 35510 | PRESTOLITE ELECTRIC INC |
5516A | 35510 | PRESTOLITE ELECTRIC INC |
5516AA | 24975 | PRESTOLITE ELECTRIC INCORPORATEDDBA PRESTOLITE ELECTRIC |
5516A | 24975 | PRESTOLITE ELECTRIC INCORPORATEDDBA PRESTOLITE ELECTRIC |
11640180 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2920-00-167-8549
Characteristic | Specifications |
---|---|
VOLTAGE IN VOLTS | 28.0 |
MAXIMUM OUTPUT CURRENT RATING IN AMPS | 180.0 |
MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2700 |
RECTIFIER LOCATION | SEPARATE |
SHAFT ROTATION DIRECTION | CLOCKWISE |
MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.125 INCHES NOMINAL |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.125 INCHES NOMINAL |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.256 INCHES MAXIMUM |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.681 INCHES MINIMUM AND 7.694 INCHES MAXIMUM |
BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
MOUNTING HOLE THREAD CLASS | 2B |
MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
THREAD LENGTH | 0.750 INCHES NOMINAL |
SECOND STEP DIAMETER | 0.874 INCHES NOMINAL |
KEYWAY WIDTH | 0.250 INCHES NOMINAL |
UNTHREADED PORTION LENGTH | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
KEYWAY LENGTH | 0.562 INCHES NOMINAL |
DISTANCE FROM END TO KEYWAY CENTER | 1.344 INCHES NOMINAL |
THREAD SERIES | UNF |
THREAD DIAMETER | 0.750 INCHES NOMINAL |
THREAD QUANTITY PER INCH | 16 |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
SUBMERSIBILITY | NONSUBMERSIBLE |
TEST DATA DOCUMENT | 19207-11640180 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |