NSN 2920-00-118-1616
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-118-1616 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: AT11160, AT 11160, 1100361, 1100361, 1100361, 2920-00-118-1616, 00-118-1616, 2920001181616, 001181616
Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
---|---|---|---|
29 | OCT 09, 1968 | 00-118-1616 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED
Cross Reference | NSN 2920-00-118-1616
Part Number | Cage Code | Manufacturer |
---|---|---|
AT11160 | 75160 | DEERE & CO |
AT 11160 | 06021 | DEERE AND CO |
1100361 | 24617 | GENERAL MOTORS CORP |
1100361 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
1100361 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-118-1616
Characteristic | Specifications |
---|---|
VOLTAGE IN VOLTS | 12.0 |
SHAFT ROTATION DIRECTION | CLOCKWISE |
MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 2.940 INCHES NOMINAL |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.115 INCHES MINIMUM AND 6.139 INCHES MAXIMUM |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 6.895 INCHES MINIMUM AND 6.919 INCHES MAXIMUM |
BOTTOM MOUNTING HOLE DIAMETER | 0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 68.0 |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 125.0 |
MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
MOUNTING HOLE THREAD CLASS | 2B |
MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED |
THREAD LENGTH | 1.000 INCHES NOMINAL |
SECOND STEP DIAMETER | 4.625 INCHES NOMINAL |
SUBMERSIBILITY | NONSUBMERSIBLE |
FURNISHED ITEMS | DRIVE PULLEY AND NUT |