NSN 2920-00-077-1440
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-077-1440 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: GKJ7303S, GKJ7303S, 2920-00-077-1440, 00-077-1440, 2920000771440, 000771440
Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
---|---|---|---|
29 | AUG 02, 1967 | 00-077-1440 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-077-1440
Part Number | Cage Code | Manufacturer |
---|---|---|
GKJ7303S | 68505 | PRESTOLITE ELECTRIC INC |
GKJ7303S | 24975 | PRESTOLITE ELECTRIC INCORPORATEDDBA PRESTOLITE ELECTRIC |
Technical Data | NSN 2920-00-077-1440
Characteristic | Specifications |
---|---|
VOLTAGE IN VOLTS | 12.0 |
MAXIMUM OUTPUT CURRENT RATING IN AMPS | 5000.0 |
MINIMUM CURRENT CUT-IN SPEED IN RPM | 1050 |
GROUNDING METHOD | INTERNAL |
GROUND POLARITY TYPE | POSITIVE |
SHAFT ROTATION DIRECTION | CLOCKWISE |
MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.118 INCHES MINIMUM AND 6.131 INCHES MAXIMUM |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 6.938 INCHES MINIMUM AND 6.951 INCHES MAXIMUM |
BOTTOM MOUNTING HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 17.0 |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 163.0 |
MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
MOUNTING HOLE THREAD DIAMETER | 0.313 INCHES NOMINAL |
MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
MOUNTING HOLE THREAD CLASS | 2B |
MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
SUBMERSIBILITY | NONSUBMERSIBLE |