NSN 2920-00-073-2128
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-073-2128 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1615292, 1102335, 1102335, 1102335, 1102335, 2920-00-073-2128, 00-073-2128, 2920000732128, 000732128
Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
---|---|---|---|
29 | JAN 01, 1963 | 00-073-2128 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-073-2128
Part Number | Cage Code | Manufacturer |
---|---|---|
1615292 | 12603 | CLARK EQUIPMENT CO |
1102335 | 24617 | GENERAL MOTORS CORP |
1102335 | 61928 | GENERAL MOTORS CORPAC-DELCO DIV |
1102335 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
1102335 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-073-2128
Characteristic | Specifications |
---|---|
VOLTAGE IN VOLTS | 12.0 |
RECTIFIER LOCATION | SEPARATE |
SHAFT ROTATION DIRECTION | CLOCKWISE |
MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.127 INCHES NOMINAL |
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 0.937 INCHES NOMINAL |
BOTTOM MOUNTING HOLE DIAMETER | 0.320 INCHES NOMINAL |
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 193.0 |
MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
MOUNTING HOLE THREAD CLASS | 2B |
MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
THREAD LENGTH | 0.444 INCHES NOMINAL |
SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
KEYWAY WIDTH | 0.125 INCHES NOMINAL |
UNTHREADED PORTION LENGTH | 0.795 INCHES NOMINAL |
KEYWAY LENGTH | 0.625 INCHES NOMINAL |
DISTANCE FROM END TO KEYWAY CENTER | 0.840 INCHES NOMINAL |
THREAD SERIES | UNF |
THREAD DIAMETER | 0.625 INCHES NOMINAL |
THREAD QUANTITY PER INCH | 18 |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
SUBMERSIBILITY | NONSUBMERSIBLE |
ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |