NSN 2920-00-058-4195

Part Details | ENGINE ACCESSORY GENERATOR

2920-00-058-4195 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.

Alternate Parts: 1106868, 1106868, 1106868, 1106868, 1106868, 2920-00-058-4195, 00-058-4195, 2920000584195, 000584195

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
29JAN 01, 196100-058-419517311 ( GENERATOR, ENGINE ACCESSORY )
REFERENCE DRAWINGS & PICTURES

ROUND FLANGE WITH HOLES EQUALLY SPACED

STRAIGHT SHAFT END, THREADED, W/KEYWAY

Cross Reference | NSN 2920-00-058-4195
Part Number Cage Code Manufacturer
110686830379EUCLID INC
110686824617GENERAL MOTORS CORP
110686861928GENERAL MOTORS CORPAC-DELCO DIV
110686816764GENERAL MOTORS CORPDELCO REMY DIV
11068681LW55REMY, INC.
Technical Data | NSN 2920-00-058-4195
Characteristic Specifications
VOLTAGE IN VOLTS24.0
MAXIMUM OUTPUT CURRENT RATING IN AMPS20.0
MAXIMUM RATED ARMATURE SPEED IN RPM5000
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1700
SHAFT ROTATION DIRECTION COUNTERCLOCKWISE
MOUNTING STYLE5 ROUND FLANGE WITH HOLES EQUALLY SPACED
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.865 INCHES MINIMUM AND 3.885 INCHES MAXIMUM
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET9.020 INCHES MINIMUM AND 9.042 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET10.120 INCHES MINIMUM AND 10.182 INCHES MAXIMUM
BOTTOM MOUNTING HOLE DIAMETER0.451 INCHES MINIMUM AND 0.461 INCHES MAXIMUM
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG159.0
MOUNTING HOLE THREAD SERIES DESIGNATOR UNC
MOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH16
MOUNTING HOLE THREAD CLASS 2B
MOUNTING HOLE THREAD DIRECTION RIGHT-HAND
SHAFT DRIVE END STYLE STRAIGHT SHAFT END, THREADED, W/KEYWAY
THREAD LENGTH0.730 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
SECOND STEP DIAMETER0.874 INCHES NOMINAL
KEYWAY WIDTH0.156 INCHES NOMINAL
UNTHREADED PORTION LENGTH1.320 INCHES NOMINAL
KEYWAY LENGTH0.750 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER1.375 INCHES NOMINAL
THREAD SERIES UNF
THREAD DIAMETER0.625 INCHES NOMINAL
THREAD QUANTITY PER INCH18
THREAD CLASS 2A
THREAD DIRECTION RIGHT-HAND
SUBMERSIBILITY NONSUBMERSIBLE
MAXIMUM OPERATING ALTITUDE RATING10000.0 FEET
FURNISHED ITEMS WOODRUFF KEY