NSN 2530-00-741-2445
Part Details | STEERING GEAR ARM
2530-00-741-2445 The portion of a steering mechanism that connects the sector shaft to the tie rod(s) or drag link.
Alternate Parts: 804535, 804535, 7412445, 2530-00-741-2445, 00-741-2445, 2530007412445, 007412445
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1963 | 00-741-2445 | 10854 ( ARM, STEERING GEAR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2530-00-741-2445
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 804535 | 34623 | AM GENERAL LLC |
| 804535 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 7412445 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2530-00-741-2445
| Characteristic | Specifications |
|---|---|
| DESIGN TYPE | OFFSET |
| CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 4.940 INCHES MINIMUM AND 5.060 INCHES MAXIMUM |
| SECTOR SHAFT MOUNTING END OVERALL WIDTH | 1.530 INCHES NOMINAL |
| SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 0.720 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| TEETH QUANTITY | 36 |
| SMALL END MAJOR DIAMETER | 0.890 INCHES NOMINAL |
| SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| SMALL END TEETH DEPTH | 0.0375 INCHES NOMINAL |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| TAPER LENGTH | 0.340 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| COUNTERBORE FEATURE | INCLUDED |
| COUNTERBORE DIAMETER | 1.063 INCHES NOMINAL |
| COUNTERBORE DEPTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| DIAMETER | 0.859 INCHES MINIMUM AND 0.864 INCHES MAXIMUM |
| WIDTH | 0.620 INCHES NOMINAL |