NSN 2520-01-094-8942
Part Details | AUTOMOTIVE AXLE SHAFT
2520-01-094-8942 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 65D3522617, 65D35226-17, 65D3522617, 65D35226-17, 65D3522617, 65D35226-17, 2520-01-094-8942, 01-094-8942, 2520010948942, 010948942
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | MAY 17, 1980 | 01-094-8942 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-01-094-8942
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 65D35226-17 | 18894 | AIR ARMAMENT CENTER/ EN |
| 65D35226-17 | 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
| 65D35226-17 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
Technical Data | NSN 2520-01-094-8942
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624-CANCELED FED SPEC SINGLE MATERIAL RESPONSE |
| METALLIC HARDNESS RATING | 38.0 MINIMUM ROCKWELL C AND 42.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 12.781 INCHES NOMINAL |
| FIRST END TYPE | SPLINED |
| FIRST END SPLINE TYPE | STRAIGHT |
| FIRST END SPLINE QUANTITY | 6 |
| FIRST END SPLINE LENGTH | 1.619 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.490 INCHES MINIMUM AND 1.495 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 1.255 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END SPLINE QUANTITY | 30 |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SECOND END PITCH DIAMETER | 1.250 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| SECOND END BEARING SEAT | NOT INCLUDED |