NSN 2520-00-907-4002
Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-907-4002 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 3802E1149, 2520-00-907-4002, 00-907-4002, 2520009074002, 009074002
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JUN 24, 1966 | 00-907-4002 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-907-4002
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3802E1149 | 3D6E9 | AXLETECH INTERNATIONAL, LLC |
Technical Data | NSN 2520-00-907-4002
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 22.562 INCHES NOMINAL |
| FIRST END TYPE | SPLINED |
| FIRST END SPLINE TYPE | STRAIGHT |
| FIRST END SPLINE QUANTITY | 16 |
| FIRST END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| FIRST END PITCH DIAMETER | 1.860 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 3.875 INCHES NOMINAL |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END SPLINE QUANTITY | 20 |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 20.0 |
| SECOND END SPLINE LENGTH | 2.406 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.872 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.746 INCHES MINIMUM AND 1.756 INCHES MAXIMUM |
| SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE AND SHOULDER |
| SECOND END FACILITY WIDTH | 0.125 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| SECOND END FACILITY DIAMETER | 1.546 INCHES MINIMUM AND 2.062 INCHES MAXIMUM |
| SECOND END FACILITY LOCATION | LOCATED 0.345 IN. FROM SHAFT END |
| SECOND END BEARING SEAT | NOT INCLUDED |