NSN 2520-00-752-1730
Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-752-1730 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 2520007521730, 3202Q2513, 3203Q2513, 3203-Q-2513, 1401D4, 7521730, 2520-00-752-1730, 00-752-1730, 2520007521730, 007521730
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1962 | 00-752-1730 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-752-1730
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2520007521730 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 3202Q2513 | 63734 | KAITLIN CORP |
| 3203-Q-2513 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS LLC |
| 1401D4 | 22852 | SPALLA INC |
| 7521730 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2520-00-752-1730
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 41.031 INCHES NOMINAL |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 1.813 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.500 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 6.427 INCHES MINIMUM AND 6.447 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| HOLE DIAMETER | 0.504 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE LENGTH | 1.375 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.622 INCHES MINIMUM AND 1.627 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.489 INCHES MINIMUM AND 1.501 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |