NSN 2520-00-737-2138
Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-737-2138 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: A3802E551, BB5112, A3802E551, A3802E551, 12C7046, 7372138, 364938, 2520-00-737-2138, 00-737-2138, 2520007372138, 007372138
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1963 | 00-737-2138 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-737-2138
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A3802E551 | 3D6E9 | AXLETECH INTERNATIONAL, LLC |
| BB5112 | 56442 | DIAMOND REO TRUCK CO |
| A3802E551 | 63734 | KAITLIN CORP |
| A3802E551 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS LLC |
| 12C7046 | 95201 | NAPCO INTERNATIONAL LLC |
| 7372138 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
| 364938 | 65282 | WHITE MOTOR CORP |
Technical Data | NSN 2520-00-737-2138
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| METALLIC HARDNESS RATING | 35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 41.188 INCHES NOMINAL |
| FIRST END TYPE | SPLINED |
| FIRST END SPLINE TYPE | STRAIGHT |
| FIRST END SPLINE QUANTITY | 12 |
| FIRST END SPLINE LENGTH | 2.9062 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM |
| FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| FIRST END FACILITY WIDTH | 0.151 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
| FIRST END FACILITY DIAMETER | 1.655 INCHES MINIMUM AND 1.662 INCHES MAXIMUM |
| FIRST END FACILITY LOCATION | LOCATED 2.408 IN. MIN.,2.418 IN. MAX FROM STRAIGHT SPLINE |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| SECOND END PITCH DIAMETER | 1.879 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.750 INCHES NOMINAL |
| SECOND END BEARING SEAT | NOT INCLUDED |
| END HOLE TYPE | DRILLED |
| HOLE QUANTITY | 1 |
| DRILLED HOLE DIAMETER | 0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| HOLE DEPTH | 0.531 INCHES NOMINAL |