NSN 2010-00-678-0415
Part Details | SHIP PROPULSION SHAFT
2010-00-678-0415 A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
Alternate Parts: DDG22031710538PC101, DDG2-203-1710538PC101, 2010-00-678-0415, 00-678-0415, 2010006780415, 006780415
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 20 | JAN 01, 1963 | 00-678-0415 | 03044 ( SHAFT, PROPULSION, SHIP ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2010-00-678-0415
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DDG2-203-1710538PC101 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Technical Data | NSN 2010-00-678-0415
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| OVERALL LENGTH | 39.354 FEET NOMINAL |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| FORWARD END KEYWAY | NOT PROVIDED |
| CONSTRUCTION | P ANY ACCEPTABLE |
| OUTSIDE DIAMETER | 18.500 INCHES NOMINAL |
| AFTER END KEYWAY | PROVIDED |
| THREADED FORWARD END | NOT INCLUDED |
| USAGE LOCATION | PORT/STARBOARD |
| THREADED AFTER END | INCLUDED |
| INSIDE DIAMETER | 4.875 INCHES MINIMUM AND 11.000 INCHES MAXIMUM |
| QUANTITY | 2 |
| DEPTH | 1.498 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| WIDTH | 3.500 INCHES MINIMUM AND 3.563 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 30.625 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 3.750 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| TAPER MAJOR DIAMETER | 18.500 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| TAPER LENGTH | 3.823 FEET NOMINAL |
| MAJOR DIAMETER | 11.250 INCHES NOMINAL |
| THREAD QUANTITY | 4 PER INCH |
| THREAD LENGTH | 10.250 INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | SMOOTH MACHINED |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 20.250 INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 4.349 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 20.250 INCHES NOMINAL |
| AFTER BEARING SLEEVE LENGTH | 6.802 FEET NOMINAL |
| PROTECTIVE COVERING TYPE | RUBBER |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| FURNISHED ITEMS AND QUANTITY | COUPLING BOLT,12; COUPLING NUT,12; PROPELLER KEY,2; PROPELLER NUT,1 |
| SPECIAL FEATURES | COLD ROLLED IN PROPELLER TAPER AND AFTER SLEEVE AREA |
| USAGE DESIGN | SUITABLE FOR DDG 2 CLASS |